Ikelite Housing - 60m - OLYMPUS OM-D E-M10 Mark III

Ikelite waterproof case for OLYMPUS OM-D E-M10 Mark III camera

• New generation housing offering a superb grip.
• The transparent polycarbonate of the back door allows a verification of the good positioning of the camera body and the control levers in the housing. The specially formulated grey color reflects the sun's rays to provide better cooling of the camera over time, especially for cameras shooting in 4K. Compared to black or clear housings, the gray color offers superior contrast for better viewing of the LCD screen.
• The levers and buttons allow the use of almost all the original camera controls.
• A dual fiber optic bracket allows the flash from the camera's internal flash to be used to drive up to 2 external flashes simultaneously via fiber optic link.
• Optional TTL electronics available with TTL converter kit and hotshoe pris part number 46036

Delivered with:

• 1 double fiber optic support
• 1 grease cup.
• 1 hexagonal key 1/8" for the tightening of the controls.
• 2 Kodak 1/4-20 threads for mounting on the bottom of the housing.
• 1 English manual (manual available in French in the "download" tab of this product sheet).
• Attention, this housing is delivered without a window! The window is essential to make the system watertight and must be ordered separately depending on the type of lens used. Please consult us for personalized advice on this subject.

Accessible controls:

All important camera controls are accessible from the housing except:

• Fn button
• Viewfinder diopter correction button
• Preview button

Compatible lenses and domes :

This housing allows the use of most lenses thanks to its DLM/B "DRY LOCK MICRO type A" port system

Compatible accessories :

A selection of accessories and spare parts for this housing is visible in the accessory tab of this product sheet. Do not hesitate to consult us for any advice on the compatibility with your existing equipment.

Compatible external flashes

The use of an external flash is recommended and improves the color rendering and the exposure of the subjects. Please note that only flashes with an electrical sync plug can be used with this camera.

• DS51 flash (TTL mode with optional 46036 converter and Manual)
• DS160 flash (TTL mode with optional 46036 converter and Manual)
• Flash DS161 (TTL mode with optional 46036 and Manual converter)
• Inon Z240 (manual mode only)
• Inon Z330 (manual mode only)
• Sea & Sea YS-D2 and YS-D3 (manual mode only)
• I-Torch SS2 (manual mode only)
• SUPE D-MAX

Compatible lights:

• Photo and video lighting available (consult us for personalized advice).

Note: This housing replaces part number 6952.13 as of May 2021.

Characteristics:

• Height: 146 Mm
• Width: 197 Mm
• Depth: 133 Mm
• Weight: 1.238 Kg
• Depth of use: 60 Meters
• Material: ABS-PC
• Camera Brand: OLYMPUS
• Photo Case Format: Hybrid
• Housing Seal: IKE 0110
• Humidity Sensor: OPTIONAL
• Vacuum Pump: Optional: 1/2" Model
• Buoyancy: Depends on the weight of the lens used
• Stage Mount Type: 2 x 1/4-20 (Kodak Pitch) screw mounts spaced 76mm apart
• Case Mount Accessory Bracket: NO
• Photo-Video Accessory Mounting Plate: OPTIONAL
• Interchangeable Window System: DLM / DRY LOCK MICRO IKELITE