Pack MCH16-SH mobile electric- 2x50L - 2 outlets

Starter pack for recreational and competition paintball activity for intensive use and mobile applications (trailers, vehicles...)

Complete ready-to-use kit for inflating paintball launchers to 3000 psi and 4500 psi.

Ideal for professional users who do not have fixed premises or for competitions.

The 2 50L / 300 bar cylinders are equipped with isolation valves intended for "mobile" use only.

Delivered with:

• 1 COLTRI MCH16-SH MINI TECH Paintball compressor set at 4500 psi equipped with manual purge (18,9 m3/h)
• 1 compressor hose to buffers of 5 meters with DIN connection 300 bars
• 2 TPED 50L/300 bar buffer cylinders with 300 bar DIN valve (for mobile use only)
• 1 quick release manifold system for the buffer cylinders to connect the compressor, the buffers and the station
• 1 flexible hose of 0.5m with anti-warp cable for the junction between the 2 cylinders
• 1 pressure gauge to read the pressure of the buffer cylinders
• 1 needle valve mounted on the inlet of the manifold and allowing to use the buffers and the station without the compressor.
• 1 professional stainless steel inflation station with 2 regulated outputs (1 output 4500 psi and 1 output 3000 psi). Possibility to have 2 outputs 3000 psi
• 1 3 meter connection cable with anti-whipping cable for the station (other lengths possible up to 100 meters)
• 1 DIN 300 bar valve with integrated purge SC000470 to connect the station to the buffer cylinder
• 1 oil can for the first oil change of the compressor.

Available options:

• 80L buffer bottles instead of 50L bottles
• Professional stainless steel paintball filling stations with 1, 2 or 4 outlets
• Safe hoses up to 100 meters long for specific terrains
• Automatic pressure switch for compressor.
• Automatic purges for compressor (requires a 240 volts power source (small generator for example).
• Hour meter for HONDA engine

Important information:

The regulation (decree of March 15, 2000) imposes that the use of inflation valves mounted directly on the buffer cylinders is reserved for a "mobile" use only. It is forbidden to use this type of assembly on fixed stations installed in premises.

In the case of fixed installations, it is imperative to have cylinders with safety valves that comply with the CE standard and it is not possible to have the isolation valve mounted directly on the buffer cylinder.

Please contact us for more information and personalized advice on your project.