Wire for IKELITE housing/2x IKELITE flash IKE 45152

IKELITE synchro twisted connection cable for connection between Ikelite housing and two Ikelite flash units.

Allows TTL transmission.

Supplied with :

• 1 Ikelite/Ikelite pin protection cap (IKE 0301)
• 1 single spindle protection cap (IKE 0301.12)
• 1 Ikelite 1cc silicone grease sachet

Additional information:

• The blue identification ring on one end of the cable indicates TTL compatibility.
• The side of the cable with the red ring is used to connect the 2nd flash (slave flash).
• Never connect this cable to a non TTL-compatible flash unit.
• After use, unplug the cord from the flash unit(s), lightly grease the joint and replace the pin protection cap to prevent the pins from seizing in the flash unit.