IKELITE housing for SONY RX100 VI

IKELITE housing for SONY RX100 VI

Compact housing, waterproof to 60 meters, for SONY RX100 Mark 6, RX100-VI cameras

• Newly designed housing in gray polycarbonate with transparent rear door for checking the correct position of the camera body and control levers inside the housing; highly resistant, it is tested and usable up to a depth of 60 meters. The specially formulated gray color reflects the sun's rays to keep the camera cooler over time. Compared with black or transparent housings, the gray color offers superior contrast for better viewing of the LCD screen.
• The rear door gasket is always visible to ensure a tight seal when closing the door. For added safety! The rear door closes with 2 stainless steel safety latches.
• The rear knobs are identified by unalterable laser engraving.
• The 60-meter depth of use, combined with the brand's reputation, gives these housings a real safety margin for the user.
• The many possible accessories make it perfectly upgradeable...
• New ergonomic trigger control, spring-return zoom control, side plug for vacuum pump (sold as an option).

Supplied with

• Double fiber optic holder
• one for RX100-VI)
• 1cc grease dispenser
• Vinyl window protector
• A 1/2-20 plug for fitting a vacuum pump (sold as an option).
• Manual in English (manual available in French in the "download" section of this product sheet)
• Ikelite USA warranty

Important note:

• The porthole supplied with this housing is designed to use the 24mm to 200mm focal length range. L
• To take full advantage of the camera's wide-angle performance, it is possible to order separately the special M67mm lens ref. IKE 9306.02. This lens is much closer to the camera for the best possible image quality, and greatly reduces vignetting when a wide-angle lens is used. In this case, the focal length will be clamped at 24-70mm, the lens will block at 70mm and won't be able to zoom any further.

Accessible controls:

• All camera controls are accessible with this housing except:
• Pop-up flash deployment button (the flash must be deployed before insertion into the housing)
• Electronic viewfinder button

Housing supplied bare, without camera