Canon EOS R10 DLM IKELITE housing

Waterproof case for CANON EOS R10 digital camera

New generation housing with a superb grip.

The transparent polycarbonate rear door allows a check of the correct positioning of the camera body and the control levers in the case. The specially formulated grey colour reflects the sun's rays to provide better cooling of the camera over time, especially for cameras shooting in 4K. Compared to black or clear housings, the grey colour offers superior contrast for better viewing of the LCD screen.

The levers and buttons allow the use of almost all the camera's original controls.

A dual fibre optic bracket allows the flash from the camera's internal flash to be used to drive up to two external flashes simultaneously via fibre optic link.

Special electronics for TTL management with the addition of the DL5 DS Link TTL converter and the IKE 46075 flash socket.

Technical specifications

• Height: 15.2 cm
• Width: 19.1 cm
• Depth: 15.0 cm
• Weight: 1.360 Kg
• Depth of Use : 60 meters
• Connectic Type External Flash : Fibre optic
• Camera Brand : CANON
• Camera Body Format : Hybrid
• Housing Seal : IKE 0110
• Humidity Sensor: OPTIONAL
• Vacuum Pump: Optional: 1/2" model
• Buoyancy: Depends on the weight of the lens used
• Mounting Type: 2 x 1/4-20 screws (not Kodak) spaced 76mm apart
• Accessory Bracket On Case: NO
• Photo-Video Accessory Mounting Plate: OPTIONAL
• Interchangeable Window System: DLM / DRY LOCK MICRO IKELITE

Delivered with

• 1 Ikelite ICS-5 flash socket
• 1 set of spare knob stopper caps
• 1 jar of grease.
• 1 English manual (manual available in French in the "download" tab of this product sheet).
• Please note that this housing is delivered without a window!

Accessible controls

All important camera controls are accessible from the housing except

• diopter adjustment wheel
• Depth of field button
• Focus switch
• Multi controller (can be pressed)