Oxygen Degreaser 1L

Oxygen Degreaser 1L

The 1L Oxygen Degreaser is the go-to product for preparing your parts before placing them in an ultrasonic tank or for thorough manual degreasing. It enables you to achieve the level of cleanliness required by the "Oxygen Clean" standards. Regular use not only ensures your safety but also extends the service life of your gaskets and valve seats by removing abrasive contaminants.

Technical specifications of the 1 L Oxygen Degreaser

• Volume: 1 litre.
• Compatibility: steel, stainless steel, chrome-plated brass, aluminium and plastics.
• Usage: cleaning of blocks, regulators, pressure gauges and valves.
• Standards: complies with degreasing requirements for oxygen service.

The Diveavenue expert’s opinion

You don’t mess about with oxygen-grade cleanliness. What I like about this degreaser is its versatility: it’s brilliant on tap threads where old grease tends to build up. A quick soak for a few minutes, a good rinse with hot water, and your parts are ready for reassembly with oxygen-grade grease. It’s a staple that everyone should have on their maintenance workbench.

Frequently Asked Questions (FAQ)

Can it be used in an ultrasonic cleaner ? Yes: it’s actually highly recommended to boost the cleaning effectiveness of cavitation. Dilute it according to the instructions to achieve an optimal cleaning solution.

Does it replace white vinegar for limescale ? No: this product is a degreaser, not a descaler. To remove limescale and verdigris, use a specific acidic product, then finish with the oxygen-based degreaser for the ‘oxygen service’ finish.

Do I need to wear gloves when using it ? Although the formula is less harsh than industrial solvents, it is always best to wear gloves to prevent skin dryness and, above all, to avoid transferring body oils onto the items you have just cleaned.